High Power White Color LED Lamp-Shenzhen Changfang Lighting Industrial Co Ltd_

Home > Products > Light Source > Traditional Light Source >Other Traditional Light Sources

High Power White Color LED Lamp

MOQ ： piece

Lead Time ： Days

Inquiry Start Order

Seller Support : Trade Authenticity Guaranteed & Accepting

Payment : L/C，T/T，Western Union, Money Gram, Credit Card, Paypal

Product details

Supply Ability

Supply Ability： piecesWarranty(Year)：1 Year

Packaging & Delivery

Packaging： piece

Product Specifications

Product Description

极限參數值(Ta=25°C)

Parameter 參數	Symbol 符号	Absolute maximum Rating 极限參值	Unit 单位
Forward Current 正向电流	IF	350	mA
Recommend Operation Current 推荐工作电流	IF	<320	mA
Peak Forward Current* 脉冲峰值电流	IFP	1000	mA
Reverse Voltage 反向电压	VR	5	V
Power Dissipation 功耗	PD	1	W
Operation Temperature 工作温度	Topr	-20~+60	℃
Storage Temperature 贮藏温度	Tstg	-40 ~ +100	℃
Electrostatic Discharge Classification (MIL-STD-883E) 抗静电等级	ESD	Class1

* Where pulse width <= 0.1msec, duty cycle <= 1/10

脉冲宽度小于等于0.1msec, 占空比小于等于1/10

Typical Electrical & Optical Characteristics at Ta = 25°C

主要光电特性（Ta = 25°C）

Items项目	Symbol符号	Condition条件	Min.最小值	Typ.经典形值	Max.最大值	Unit单位
Forward Voltage	VF	IF =350mA	3.0		3.3	V
Reverse Current	IR	VR = 5V			5	mA
Luminous Flux	lumen	IF =350mA	70		100	lm
Correlate Color Temp.	CCT	IF =350mA	2850		8000	K
50% Power Angle	2 q?	IF =350mA	120	130	140	deg
Color Rending Index	CRI	IF =350mA	65	75	80

Important Notes: 重点注意事项

1) All ranks will be included per delivery, rank ratio will be determined by CHANGFANG

所有交货等级所有级别的比例均由长方决定

2) The measurement tolerance of luminous Intensity is ±10%.

发光强度的测量公差值为±10%.

The measurement tolerance of the Color Coordinates is ± 0.05.

色坐标的测量公差值为± 0.05.

3) The measurement tolerance of Vf is ±0.1V.

正向电压的测量公差值为±0.1V.

4) Pb content <1000PPM.

金属铅的含量小于1000PPM

5)Data is subject to change without prior notice; please refer to CHANGFANG Sales for the latest version.

相关资料的更改请恕不能提前通知，请咨询长方销售最新版本.

6)Customer acknowledges that it should not operate the samples beyond the level recommended in the specification Guidelines.

客户清楚在使用样品时不应超出规格书推荐以上的驱动情况.

7) Customer also acknowledges that light from LEDs in the Samples is bright But no-radiant and may be intense enough to injure human eyes. Individuals should wear proper protective eye equipment at all times and not look directly into the LED light. Further, individuals should not look at reflected light originating from the LEDs for more than sixty (60) seconds.